ES Reflow with mesh belt and pin chain full convection oven

In an ideal profile, preheat temperatures are maintained long enough
to permit activation of fluxes, while exposure of the components to
higher reflow temperatures is kept to a minimum. These full
convection reflow ovens achieve perfect heating profiles despite their
modest size.

The ES reflow oven offers full forced hot air heating to maintain
consistent edge-to-edge temperatures, regardless of component size
or density. Infinite profiling possibilities are achieved in this reflow
oven through 8 independently-controlled heating zones, with bottom
side heating also adjustable to prevent overheating of inverted
components on double-sided boards.

Items                          ES4                         ES5                       ES6
Hot Air Zones     4 Top 4 Bottom    5 Top 5 Bottom    6 top 6 Bottom     
Heating length          1200mm            1500mm             1800mm
Overall dim.   L2400*W1000*H1400   L2700*W1000    L3000*W1000
Net weight         about 400 Kg        about 500 Kg        about 600 Kg
General power        11KW                13KW                  15KW
Consumption    Approx.4KW    Approx.4.5KW         Approx.5KW
Ramp time           15 minutes        18 minutes         21 minutes
Control type       PC and  PLC Control
Temp range        Ambient-350℃
Temp accuracy        ±1 ℃
Temp uniform        ±2 ℃
Cooling type        1 cooling  Blower system 400mm
Conveyor type        Stainless steel mesh belt and Pin Chain
Conveyor height        900 ±20mm
PCB Clearance        30mm  
Max PCB        350mm on mesh; 330mm on Pin chain ( Option :
500mm on mesh 460mm on chain )
Conveyor direction        Left to right (option: right to left)
Conveyor speed        0-900mm/min
Hood lift        By Pneumatic cylinder
Power supply        380v,3ph,50hz